SKU:- K070796 | Part Number:- K070796
Sale price
$632.39
Regular price
The Knorr Bremse Brake Pad Kit Per Axle K070796 is a heavy-duty air disc brake pad kit for Bendix ADB22X and ADB22X-LT caliper systems. The kit configuration corresponds to a four-pad axle set using the FMSI D1369 pad shape, with typical pad dimensions of approximately 210 mm in length, 108 mm in width and 30 mm in thickness. The pads are used across a wide range of commercial vehicles including prime movers, rigid trucks, trailers, buses and motorhome chassis from manufacturers such as Freightliner, Kenworth, Mack, Peterbilt, Volvo and others that specify ADB22X or compatible Knorr SK7 systems. Equivalent kits in the same reference family use copper-free, asbestos-free friction materials, with some severe-duty variants rated for operating temperatures up to 650�C and matched to 430�440 mm rotors with a minimum thickness of around 37 mm. The K070796 pattern is widely cross-referenced by other friction brands, supporting straightforward replacement in on-highway fleet service where consistent braking performance is required.
- Pad Length: 210 mm - Pad Width: 108 mm - Pad Thickness: 30 mm - Pad Shape: FMSI D1369 - Material: Graphite-metallic, copper-free, asbestos-free - Temperature Range: -40C to +650C - Rotor Compatibility: 430440 mm outer diameter, minimum 37 mm thickness - Kit Contents: 4 brake pads with shims and complete hardware kit (retainer bars, pad retention springs, shear adaptors, pins, washers, split pins, hexagonal adapter, rubber caps) - Weight: 22.7 lbs - Suits Bendix ADB22X, ADB22X-LT and Knorr SK7 air disc brake calipers on heavy commercial vehicles - Used on trucks, trailers, buses and motorhome chassis across brands such as Freightliner, Kenworth, Mack, Peterbilt, Volvo and others - Supplied as a complete axle brake pad kit with four pads and associated hardware in many equivalent kits - Pad shape matches FMSI D1369 specification for correct fitment to compatible calipers - Typical pad dimensions around 210 mm length, 108 mm width and 30 mm thickness for ADB22X applications - Friction material options across equivalents include graphite-metallic and low-metallic, copper-free and asbestos-free formulations - Many cross-reference kits are engineered for high thermal stability up to around 650C in severe duty service - Hardware packages commonly include abutments, shims, retention plates, springs, pins and adaptors to support correct installation - Several equivalent kits are validated to FMVSS 121 and ECE R90 standards for regulated braking performance - Intended for on-highway fleet use where consistent braking, extended rotor life and controlled pad wear are required - Compatible with 430440 mm outside diameter rotors with minimum thickness around 37 mm in ADB22X systems - Installation should follow Bendix or caliper manufacturer procedures, including specified torque values and bedding stops where provided
