Skip to product information
Out of stock
SKU:- PEN-PSECC0005 | Part Number:- PSECC0005
Sale price
$37.58
Regular price
The Penrite PEN-PSECC0005 Pro Series EGR & CAT Clean+ is a professional-grade automotive cleaning additive designed to clean and prevent deposit build-up in emission control systems. It targets catalytic converters, EGR valves, oxygen sensors, intake valves, fuel injectors and combustion chambers � helping restore performance and reduce emissions without costly repairs. Suitable for petrol, diesel, LPG, E10 and hybrid vehicles. Not for use in 2-stroke engines.
- � Product: Pro Series EGR & CAT Clean+
- � Volume: 500ml
- � Compatible fuels: Petrol, LPG, Diesel, E10, Hybrid
- � Not suitable for 2-stroke engines
- Key Features:
- � Cleans catalytic converters and reduces harmful build-up
- � Cleans EGR passageways with regular use
- � Removes deposits from injectors, reducing misfire events
- � Cleans oxygen sensors to smooth rough idling
- � Reduces CO, HC and NOx emissions
- � Increases engine performance and improves fuel economy
- � Powerful low cost alternative to costly repairs
- � Non-flammable ingredients pass through to exhaust cycle
- Normal Fuel Additive Use:
- Add entire 500ml can to approximately 20-25 litres of fuel at a dosage rate of approximately 2-3%. Run engine to normal operating temperature then for a further 10 minutes. Do not add to fuel tank with less than 15 litres of fuel. Do not add directly into fuel filter.
- Service Maintenance (Professional Use):
- 1. Connect a flexible tube with tap (e.g. vacuum pipe) from the inlet manifold into the can, or pour into a pump spray bottle and spray directly into the vacuum pipe.
- 2. Run engine at approx. 2000-3000 RPM and open tap / commence spraying at short intervals.
- 3. If engine speed drops sharply (below 700 RPM), close tap or stop spray � product is working.
- 4. Leave ECC+ in system, remove can and reconnect vacuum pipe.
- 5. Turn engine over until it starts � unburned product will pass the O2 sensor and clean EGR valve, catalytic converter and particulate filter.
- 6. Repeat steps 2-4 as needed for sufficient coverage.
Colour Blue Flash Point, �C 67
