Specials

CATALOGUE SPECIAL

WAS $832

NOW $425

+GST 9–33 Volt High Powered LED Driving light — 16,500 Lumens. A break through in LED driving light design and performance. Made at 215mm OD to fit the widest range of Bull Bar applications possible whilst maintaining power and beam penetration for both 4WD but also transportation markets where distance and light volume are vital requirements for safe driving.

Engineered for Performance

Class leading hybrid beam pattern combines volume for off-road 4WD use and long range performance for transport. Super powerful 5 watt XP-G2 Cree® L.E.Ds produce 165 watts of pure white light (5700°K). Extraordinary volumes of broad penetrating light of 16,500 raw lumens (10,175 effective lumens). Highly polished super-efficient aluminium metallized reflector utilising precisely scalloped parabolas for ultimate control and performance.

Engineered for Versatility

Unique tool-free vertical adjustment affords quick on-the-fly beam correction via ergonomic aluminium adjuster knob Multi-slot 3-bolt mounting options ensures suitability for all bull bar and nudge bar makes and models Superior mounting bracketry suspension system utilises polymer rubberto suspend the lamp making it impervious to shock and vibration

Engineered for Durability

Constructed from light weight super strong Pressure Die Cast Aluminium uncompromised strength and rugged durability Built-in ‘Active Thermal Management System’ (ATMS) enables the Ultima 215 to run harder for longer Fully sealed against water and dust ingress (IP66 & IP67) utilising a genuine Nitto breather vent and integrated DT connector Virtually unbreakable hard coated polycarbonate lens and lens protector.

Technical Information

INPUT VOLTAGE RANGE	9-33V
CURRENT DRAW	13.8A at 12V
POWER	165W
LEDs	33x 5W Cree® XP-G2 LEDs
LUMENS	16,500 Raw / 10,175 Effective
LP RATING	IP66 & IP67
OPERATING TEMPERATURE	-10°C to 65°C
COLOUR TEMPERATURE	5700°K
SIZE	215mm
WEIGHT	3.2kg
ECE	ECE R10
OTHER	Active Thermal Management System (ATMS)
OTHER	1 LUX at 900m

 

Product Comprises Of

1.	1x Hybrid Beam LED Driving Light
2.	1x Hard Coated Polycarbonate Lens Protector
3.	1x Stainless Steel Mounting Hardware Kit
4.	4x Interchangeable Trim Pieces (Blue Black Red & Yellow)
5.	1x Cable with Pre-Wired DT Connector
6.	1x Fitting Instruction Booklet

CATALOGUE SPECIAL

WAS $1752

NOW $850

+GST 9–33 Volt High Powered LED Driving light — 16,500 Lumens. A break through in LED driving light design and performance. Made at 215mm OD to fit the widest range of Bull Bar applications possible whilst maintaining power and beam penetration for both 4WD but also transportation markets where distance and light volume are vital requirements for safe driving.

Engineered for Performance

Class leading hybrid beam pattern combines volume for off-road 4WD use and long range performance for transport. Super powerful 5 watt XP-G2 Cree® L.E.Ds produce 165 watts of pure white light (5700°K). Extraordinary volumes of broad penetrating light of 16,500 raw lumens (10,175 effective lumens). Highly polished super-efficient aluminium metallized reflector utilising precisely scalloped parabolas for ultimate control and performance.

Engineered for Versatility

Unique tool-free vertical adjustment affords quick on-the-fly beam correction via ergonomic aluminium adjuster knob Multi-slot 3-bolt mounting options ensures suitability for all bull bar and nudge bar makes and models Superior mounting bracketry suspension system utilises polymer rubberto suspend the lamp making it impervious to shock and vibration

Engineered for Durability

Constructed from light weight super strong Pressure Die Cast Aluminium uncompromised strength and rugged durability Built-in ‘Active Thermal Management System’ (ATMS) enables the Ultima 215 to run harder for longer Fully sealed against water and dust ingress (IP66 & IP67) utilising a genuine Nitto breather vent and integrated DT connector Virtually unbreakable hard coated polycarbonate lens and lens protector.

Technical Information

INPUT VOLTAGE RANGE	9-33V
CURRENT DRAW	13.8A at 12V
POWER	165W
LEDs	33x 5W Cree® XP-G2 LEDs
LUMENS	16,500 Raw / 10,175 Effective
LP RATING	IP66 & IP67
OPERATING TEMPERATURE	-10°C to 65°C
COLOUR TEMPERATURE	5700°K
SIZE	215mm
WEIGHT	3.2kg
ECE	ECE R10
OTHER	Active Thermal Management System (ATMS)
OTHER	1 LUX at 900m

CATALOGUE SPECIAL

WAS $1258

NOW $620

+GST 9–33 Volt High Powered LED Driving light — 12,000 Lumens. A break through in LED driving light design and performance. Made at 180mm OD to fit the widest range of Bull Bar applications possible whilst maintaining power and beam penetration for both 4WD but also transportation markets where distance and light volume are vital requirements for safe driving.

Engineered for Performance

Class leading hybrid beam pattern combines volume for off-road 4WD use and long range performance for transport. Super powerful 5 watt XP-G2 Cree® L.E.Ds produce 120 watts of pure white light (5700°K). Extraordinary volumes of broad penetrating light of 12,000 raw lumens (6,795 effective lumens). Highly polished super-efficient aluminium metallized reflector utilising precisely scalloped parabolas for ultimate control and performance.

Engineered for Versatility

Unique tool-free vertical adjustment affords quick on-the-fly beam correction via ergonomic aluminium adjuster knob Multi-slot 3-bolt mounting options ensures suitability for all bull bar and nudge bar makes and models Superior mounting bracketry suspension system utilises polymer rubberto suspend the lamp making it impervious to shock and vibration

Engineered for Durability

Constructed from light weight super strong Pressure Die Cast Aluminium uncompromised strength and rugged durability Built-in ‘Active Thermal Management System’ (ATMS) enables the Ultima 180 to run harder for longer Fully sealed against water and dust ingress (IP66 & IP67) utilising a genuine Nitto breather vent and integrated DT connector Virtually unbreakable hard coated polycarbonate lens and lens protector.  

Technical Information

INPUT VOLTAGE RANGE	9-33V
CURRENT DRAW	8.9A at 12V
POWER	120W
LEDs	24x 5W Cree® XP-G2 L.E.Ds
LUMENS	12,000 Raw / 6,795 Effective
LP RATING	IP66 & IP67
OPERATING TEMPERATURE	-40°C to 65°C
COLOUR TEMPERATURE	5700°K
SIZE	180mm
WEIGHT	1.75kg
ECE	ECE R10
OTHER	Active Thermal Management System (ATMS)
OTHER	1 LUX at 600m

CATALOGUE SPECIAL

WAS $584

NOW $340

+GST 9–33 Volt High Powered LED Driving light — 12,000 Lumens. A break through in LED driving light design and performance. Made at 180mm OD to fit the widest range of Bull Bar applications possible whilst maintaining power and beam penetration for both 4WD but also transportation markets where distance and light volume are vital requirements for safe driving.

Engineered for Performance

Class leading hybrid beam pattern combines volume for off-road 4WD use and long range performance for transport. Super powerful 5 watt XP-G2 Cree® L.E.Ds produce 120 watts of pure white light (5700°K). Extraordinary volumes of broad penetrating light of 12,000 raw lumens (6,795 effective lumens). Highly polished super-efficient aluminium metallized reflector utilising precisely scalloped parabolas for ultimate control and performance.

Engineered for Versatility

Unique tool-free vertical adjustment affords quick on-the-fly beam correction via ergonomic aluminium adjuster knob Multi-slot 3-bolt mounting options ensures suitability for all bull bar and nudge bar makes and models Superior mounting bracketry suspension system utilises polymer rubberto suspend the lamp making it impervious to shock and vibration

Engineered for Durability

Constructed from light weight super strong Pressure Die Cast Aluminium uncompromised strength and rugged durability Built-in ‘Active Thermal Management System’ (ATMS) enables the Ultima 180 to run harder for longer Fully sealed against water and dust ingress (IP66 & IP67) utilising a genuine Nitto breather vent and integrated DT connector Virtually unbreakable hard coated polycarbonate lens and lens protector.  

Technical Information

INPUT VOLTAGE RANGE	9-33V
CURRENT DRAW	8.9A at 12V
POWER	120W
LEDs	24x 5W Cree® XP-G2 L.E.Ds
LUMENS	12,000 Raw / 6,795 Effective
LP RATING	IP66 & IP67
OPERATING TEMPERATURE	-40°C to 65°C
COLOUR TEMPERATURE	5700°K
SIZE	180mm
WEIGHT	1.75kg
ECE	ECE R10
OTHER	Active Thermal Management System (ATMS)
OTHER	1 LUX at 600m

 

Product Comprises Of

1.	1x Hybrid Beam L.E.D Driving Light
2.	1x Hard Coated Polycarbonate Lens Protector
3.	1x Stainless Steel Mounting Hardware Kit
4.	4x Interchangeable Trim Pieces (Blue Black Red & Yellow)
5.	1x Cable with Pre-Wired DT Connector
6.	1x Fitting Instruction Booklet

CATALOGUE SPECIAL

 

NOW $40

+GST.   This 6mm x 9m Chain Kit comes with Winged Grab Hooks for a safe and strong grip on heavy loads. Made from durable Grade 70 steel with an electroplated gold finish, it has a lashing capacity of 2,300kg.

CATALOGUE SPECIAL

 

NOW $23

+GST.   Securely fasten and gradually adjust your load with the durable 8mm-10mm Ratchet Loadbinder C/W Grab Hooks. Designed with high-quality components and a maximum lashing capacity of 6,000kg, this loadbinder complies with ASNZ 4344 2001 and reduces stress on the operator's body.

CATALOGUE SPECIAL

 

NOW $4

+GST.   Strong and versatile, the 6mm Grade 70 Winged Grab Hook is a great addition to tie-down chains and can also replace hooks on loadbinders. It is designed with cradles on both sides to prevent chain deformation and has full lashing capacity.

-10 Mm Grab Hook-Diameter Chain 6-10mm-D 72 Mm H 13 Mm L 110 Mm-P 11 Mm R 61 Mm W 14 Mm-Mass 0.56 Kg Maximum Working Load (Mwl) 3000 Kg   $6 + Each - or BUY 10 for $5 + each   On Special until April 30 2024

CATALOGUE SPECIAL

 

NOW $15

+GST.   Secure your cargo with ease using our 50mm x 9m Ratchet Tie Down Strap. With a lashing capacity of 2,500kg, this durable strap is perfect for heavy-duty jobs. The steel ratchet buckle allows for quick tensioning, while the tightly weaved polyester webbing ensures longevity. The included hook and keeper end fittings provide a reliable connection between your vehicle and the tie-down.